Ferritic SS 410 Flanges and Fittings
UNS S41000 or SS 410 Fittings and SS 410 Flanges are basically martensitic stainless steel that is utilized for exceptionally focused parts and gives great corrosion resistance in addition to high quality and hardness.
Chemical composition
GRADE |
Cr |
Mn |
Si |
Ni |
C |
P |
S |
Fe |
|
---|---|---|---|---|---|---|---|---|---|
SS 410 |
MIN |
11.5 |
– |
– |
– |
– |
– |
||
MAX |
13.5 |
1 |
1 |
0.5 |
0.15 |
0.04 |
0.03 |
BALANCE |
Stainless Steel 410 Pipe Fittings and Flanges offer both exceptional wear and corrosion resistance. Stainless Steel 410 Pipe Fittings and Flanges can be heat treated to obtain a wide range of mechanical properties and can be further enhanced by a series of processes.
Physical properties
Stainless Steel 410 Pipe Fittings and Flanges combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium alloys. SS 410 fittings possess magnetic properties in both the annealed and hardened conditions.
Specification of Flange
The specified ASTM Standard Specification for Wrought Martensitic SS 410 Flanges is ASTM A182 with manufacturing standard such as ANSI/ASME B16.5, B16.48, BS4504, B 16.47 Series A & B, BS 10, EN-1092, DIN, etc.
Mechanical Properties of flange
Grade |
Tensile Strength |
Yield Strength |
Elongation |
Reduction of area |
Hardness, MAX |
---|---|---|---|---|---|
[MPA] |
[MPA] |
(% in 50mm) min |
min % |
HBW |
|
SS 410 |
485 |
275 |
18 |
35 |
143-207 |
According to application and uses in pipes and tubes SS 410 flanges are broadly grouped into different sort, for example, Welding Neck Flange(WNF) & Long Welding Neck Flange(LWNF), Slip-on Flange(SOF), Lap Joint Flange(LJW), Blind Flange, Socket Welding Flange (SWF), Threaded Flange(THW), Plate Flange.
SS 410 Flange for the most part has different face type, for example, Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ), blind flange, with various class rating as 50 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16,din 2.4856 , 25, 40 & ANSI B16.5.
Specification of Fittings
The Specification for Wrought Martensitic SS 410 Fittings is ASTM A403, having Specific manufacturing Standards as ASME/ANSI B16.9, ASME B16.28, MSS-SP-43.
Mechanical Properties OF Fittings
Grade |
Tensile Strength |
Yield Strength |
Elongation |
Reduction of area |
Hardness, MAX |
---|---|---|---|---|---|
[MPA] |
[MPA] |
(% in 50mm) min |
min % |
HBW |
|
SS 410 |
485 |
275 |
18 |
35 |
143-207 |
SS 410 Fittings that are categorically available are Elbow, Reducer, Tee, Coupling, Bend, Stub End, Cap, Nipple, Washer, Cross, Union etc which are available in different types such as Welded, Seamless and Fabricated having thickness range from 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Application
Grade 410 or UNS S41000 Flanges and Fittings provide good corrosion resistance to air, water and some chemicals and also resistance to food acids. Whereas these SS410 flanges are satisfactory resistance to nitric acid, concentrated sulphuric acid, dilute acetic acid and naphtha.
SS 410 pipes and tubes are used in large scale industries such as Sugar Industries, Chemical industries, Petrochemical Industries, Pharmaceutical plants, Fertilizer and Oil plants, Textile machineries, Cement industry etc.