Ferritic SS 430 Sheets and Plates

Ferritic SS 430 Sheets and Plates

430 grade stainless steel sheet and 430 stainless plate is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels. It exhibits good corrosion resistance in mildly corrosive environments and good oxidation resistance at elevated temperatures.

Chemical Composition

GRADE

 

Ni

Cr

Si

C

Mn

P

S

Mo

Fe

SS 430

Min

16

BALANCE

Max

0.5

18

1

0.12

1

0.04

0.03

Properties

430 SS sheet and plate has excellent corrosion resistance to a wide variety of corrosive media including nitric acid as well as sulphur gases and many organic and food acids. Being ferritic in nature, the alloy has very high resistance stress corrosion cracking.

Mechanical Properties

Grade

Tensile Strength

Yield Strength

Elongation

Hardness, MAX

[MPA]

[MPA]

(% in 50mm) min

HBW

HRB

SS 430

450

205

22

183

89

Compared to the austenitic grades, 430 sheet and 430 SS plate has a low work hardening rate, which enables easy bending and forming and consequently this grade is less appropriate for stretch forming applications than austenitic grades.

Physical Properties

Grade

Density (g/cm3)

Elastic Modulus (GPa)

Mean Co-eff of Thermal Expansion (μm/m/°C)

Thermal Conductivity (W/m.K)

Specific Heat (J/Kg.K)

Electrical Resistivity (μΩ.m)

0-100°C

0-315°C

0-538°C

at 100°C

at 500°C

0-100°C

SS 430

7.8

200

10.4

11

11.4

26.1

26.3

460

600

According to the 430 stainless steel data sheet, SS 430 or 430 stainless sheet offers exceptional resistance to corrosion by sulphuric and phosphoric acids and is often the most cost effective alloy in sulphuric acid service. The additions of copper and molybdenum increase its resistance to general stress corrosion and to specific attacks such as crevice corrosion.

Specification

The Ferritic SS 430 stainless steel sheet and 430 Stainless steel plate specified by ASTM standard as  ASTM A 240 or ASME SA-240 are readily available in different types such as, for example, SS 430 Plane sheet and Plate, Shim, Thin, Perforated, Polished, Diamond, Chequered, Hot rolled, Cold rolled, Annealed, Soft annealed , coils, clad plate, strip etc.

As per availability and requirement Grade 430 Sheets and Plate can be manufactured in different types burt, also they also have different types of finishing on surface such as for example, Brushed , Polished t, Mirror finish, Mirror polished, Hot rolled(HR), Cold rolled  (CR), 2B,2D, BA NO(8), SATIN(Met with Plastic coated).

Application

  • Handling equipment for mining,
  • Heat-resisting applications,
  • Automotive trim,
  • Industrial roofing & wall cladding,