Round Bar

Round Bar

Inconel 600 is an alloy with high-performance properties that also has a few key qualities: excellent mechanical strength, thermal creep deformation-protected nature, better surface stability, and anti-corrosive from oxidation.

Chemical composition

GRADE

 

Ni

Cr

Fe

C

Mn

Si

Cu

P

S

Inconel 600

Min.

72

14

6

Max.

17

10

0.15

1

0.5

0.5

0.015

0.015

Properties

Inconel 600 bar is a nickel-chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments. Its chromium content gives the alloy resistance to sulfur compounds and various oxidizing environments. 

Mechanical Properties

Grade

Tensile Strength

Yield Strength

Elongation

[MPA]

[MPA]

(% in 50mm) min

Inconel 600

550

240

40

The chromium content of the alloy makes it superior to commercially pure nickel under oxidizing conditions. Inconel 600 round bar is relatively un-attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. The alloy resists steam and mixtures of steam, air and carbon dioxide.

Physical Properties

Grade

Density (g/cm3)

Melting Point °C

Elastic Modulus (GPa)

Co-eff of Thermal Expansion (μm/m/°C)

Thermal Conductivity (W/m.K)

Specific Heat ( J/Kg.K)

Electrical Resistivity (μΩ.m)

21-93°C

At 20°F

Inconel 600

8.43

1413

207

13.3

14.8

500

1.04

Inconel 600 bar is used in many applications such as in Ethylene dichloride (EDC) cracking tubes, Conversion of uranium dioxide to tetrafluoride in contact with hydrofluoric acid,

In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc.

Specification

The Specification for Nickel Alloy Bars as per astm Standard is ASTM B 166/ASME SB-166, they are categorised into different form and shape such as Inconel 600 Round Bar, Rod, Channel Bar, T-Bar, Flat Bar, Blocks, Square, bar, Triangle, Threaded, Hex (A/F), Profiles, Half Ingot, Billet, I/H Bar, etc. This Inconel 600 round bar can be found at various Inconel 600 round bar suppliers.

When considering wrought stainless round bars, material shall be furnished in the following way such as  Hot-worked, Hot-worked and Annealed, Hot-worked- Annealed and cold worked or Hot-worked-Annealed and heat treated.

Round bars depending upon their treatment and their use and application they can also be available in different surface finishes such as Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, 2B, 2D, etc. The Inconel 600 round bar price depends on the type of finish of the bar. 

Application

Inconel 600 Bars are used in many industries such as petrochemical, pharmaceutical, food processing, fertilizer, agro chemical, aerospace, desalination, oil and gas power generation, pulp and paper and Man-made fiber.